Key Features
- Turns any ground-level area into a functional loading dock; mounts in a pit or anchors to a concrete pad
- Precision velocity fuses on the hydraulic cylinders prevent platform free-fall
- Handrails with 4″ (102 mm) kick plates and dual barrier chains on both ends, an 8″ (203 mm) tapered toe guard and a mechanical flip-down maintenance stop
- Factory assembled and load tested, with a full-length deck beam and solid plate steel legs
- Hard-chromed pivot pins and maintenance-free, lifetime-lubricated bushings at all pivot points
- Completely sealed, weather-resistant cylinders vented back to the hydraulic tank to keep contaminants out
Specifications
| Rated capacities | 5,000 to 20,000 lb (2,273 to 9,091 kg), based on evenly distributed loads |
|---|---|
| Deck widths | 60″, 72″, 84″ or 96″ (1,524–2,438 mm) |
| Deck lengths | 96″, 108″, 120″ or 144″ (2,438–3,658 mm) |
| Lowered height | 10″ to 21″ (254–533 mm), depending on capacity and deck length |
| Vertical travel | 59″ (1,499 mm) |
| Lip | 18″ (457 mm) long x 60″ (1,524 mm) wide with lifting chain, on the rolling end |
| Power | 5 HP remote powerpack standard (3 to 10 HP available); three-phase, common voltages |
| Controls | 24 VAC push button on a 12′ (3.65 m) cord; motor, controls and push button factory pre-wired and tested (UL/CSA approved) |
| Standard | Complies with ANSI MH29.1 |
Options
- Electric toe guard protection
- Warning horn with volume control
- Flashing amber beacon light
- Interlock swing gates
- Accordion safety skirting
- Mechanical pop-up wheel chock
- Key switch on push button
- Aluminum, split, hydraulic, spring-assist, extended-length or multiple lips
- Low temperature oil and immersion heater for the oil reservoir
Applications
A practical alternative to building a full loading dock at grocery stores, schools, hospitals and distribution centers, anywhere you load and unload trucks at ground level.
